Go make something®.

Mammoth Mountain

This is an experimental model of Mammoth Mountain, CA.

Hex Box

This one piece box with a flexible hinge comes in a variety of useful sizes and shapes. Great for storing and organizing those small items that always seem to get misplaced.

Flexion Hinge

It’s recommended to use a flexible material (PETG, BDP, etc.). PLA breaks too quickly. The bending part needs to be as thin as possible in order to last for a while - larger thickness will cause more stress

helikopter disli sistemi

Snap - Fit Round Version B

It’s a dismountable snap fit. The holding force is relatively low (depending on the hook width). The knob is the protruding middle part between two holes. If the two parts are snapped together, they can

Snap - Fit Double Clip Version B

See description of basic “Snap Fit Clip Double Clip”. Only difference is the hook angle used in order to make it dismountable. The slanted angle of the hook allows the clip to be dismounted by pulling

MCtest

This is a test.   This is only a test.  Do not attempt to adjust your set.

hidrocell

Magic Leap

Magic Leap Spacial Computing Integration Project.  This is an experimental display gallery to understand scale, positioning, and markup. 

CA Modern House

This is a demo of a modern California style house designed to be viewed at full scale.  Definitely a work in progress.

Water Turbine

This project is to build a 3d-printable water turbine re-using the brushless motor - generator design. In contrast to the wind turbine this system should produce a considerable amount of energy.

Solar Water Distiller

This project is to design a 3d printable system which can clean polluted water.

Propellers

Print your own propellers! The pitch and diameter of these designs are adjustable and can be optimized for the geometry of the propellers and the hub can be tuned for a specific plane.

Heating Infrastructure

Click here to edit your project summary.  You can include inline images if you prefer.

Interlocking Hinge

This collection has a hinge solution for almost every need. The hinge prints in one piece. The two parts are interlocking (can’t be taken apart).

Multi tool slider

A simple 3D printable sliding system to make straight cuts or carvings with a multi tool.

McLaren P1 GTR

Click here to edit your project summary.  You can include inline images if you prefer.

Snap - Fit Clip Version A

Advantage: very short hole length (beam). The flexible part of the beam/hook is on the other side of the hole. Similar to the cantilever snap fit, the size of this flexible par depends on the material,

Cable Ties

More than just a cable tie. Because these versatile ties can be printed in many sizes and widths, they are suitable for many projects. Customize with color and use in the garden, workshop, office, or
— 20 Items per Page
Showing 1 - 20 of 42 results.