Go make something.

makeSEA Brushless Motor - 60W

Setting itself apart from other 3D-printed motor prototypes, makeSEA’s brushless motor can be printed on most consumer-grade 3D printers and assembled by virtually anyone. It is fully functional, reliable

Water Turbine

This project is to build a 3d-printable water turbine re-using the brushless motor / generator design. In contrast to the wind turbine this system should produce a considerable amount of energy.

Spatula Collection Version A with Teeth

It’s the same design as “Spatula A“ but the blade is toothed. Useful for distributing even amounts of all kind of gels on a surface. In the model the tooth size depends on the tooth distance.

Snap - Fit Round Version B

It’s a dismountable snap fit. The holding force is relatively low (depending on the hook width). The knob is the protruding middle part between two holes. If the two parts are snapped together, they can

Jars

These jars come in a variety of shapes and sizes and are fully scalable. Perfect for storing and organizing small items for the kitchen, craft room, playroom or garage.

Spatula Collection Version A

This broad handled "spatula" is well suited for mixing, spreading and lifting of materials such as plaster and paint, but is also at home in the kitchen!

Battery free bike light

Click here to edit your project summary.  You can include inline images if you prefer.

Snap - Fit Cantilever Version A

This Snap Fit is permanently locking - basically it can’t be dismounted. By designing a small hole at the location of the hook, the hook could be bent back by pushing a small pin through the hole (an

Snap - Fit Double Clip Version B

See description of basic “Snap Fit Clip Double Clip”. Only difference is the hook angle used in order to make it dismountable. The slanted angle of the hook allows the clip to be dismounted by pulling

Snap - Fit Clip Version B

The design is not much different than the basic “Snap Fit Clip”. The slanted angle of the hook allows the clip to be dismounted by just pulling it back. The angle is a parameter in the f3d-file.

Propellers

Print your own propellers! The pitch and diameter of these designs are adjustable and can be optimized for the geometry of the propellers and the hub can be tuned for a specific plane.

Fluke 8842A Replacement Parts

This is a L/R Handle replacement part for the Fluke 8842A Desktop Multimeter.

Spatula Collection Version B with Teeth

This collection mimics the B Collection but with the addition of teeth for more grip! Use it as needed to mix, spread and lift materials in the kitchen, the craft room, garage... uses are endless!

Snap - Fit Cantilever Version B

The Snap Fit Cantilever B is like the Snap Fit Cantilever design except the hook has a less sharp angle, so that it is not permanent and can be disassembled. Hook angle is 45°.

Cable Ties

More than just a cable tie. Because these versatile ties can be printed in many sizes and widths, they are suitable for many projects. Customize with color and use in the garden, workshop, office, or

Snap - Fit Round Version A

It’s a dismountable snap fit. The holding force is relatively low (depending on the hook width). This makes it useful for a door lock. The design is related to the “Snap Fit Double B” with flipped hooks

Hex Box

This one piece box with a flexible hinge comes in a variety of useful sizes and shapes. Great for storing and organizing those small items that always seem to get misplaced.

Spatula Collection Version B

Same blade as “Spatula A” but with a different shaped handle. The handle in the STL files has a fixed size (60mm long, 12mm thick, 20mm width). Handle parameters and slant of blade front can be adjusted

Snap - Fit Clip Version A

Advantage: very short hole length (beam). The flexible part of the beam/hook is on the other side of the hole. Similar to the cantilever snap fit, the size of this flexible par depends on the material,

Solar Water Distiller

This project is to design a 3d printable system which can clean polluted water.
— 20 Items per Page
Showing 1 - 20 of 26 results.