Inform:  makeSEA blog

The devil is in the details

makeSEA 3D printed rotor with magnets

When Christoph designed, printed and load tested version 1 (the second version) of the makeSEA brushless motor, he had some concerns about how many RPMs the rotor could sustain without breaking apart. As you know, 3D printing is not an exact science, and even the smallest anomaly or detail can cause wobble that at the very least, negatively effects efficiency and at the worse, results in magnetic projectiles careening through your workspace.

This brings up another question; he mentioned that the strength limits of the PLA and PTEG he used to print the rotor are worth exploring, particularly in relation to the weight of the magnets and RPMs. I'm curious if any makeSEA members want to share their own findings. If so, please do so below. But remember what they say: It's all fun until someone loses an eye, so be careful out there. 

If you want to check out how efficient Christoph's 3D printed motor was in the end, check out his extensive entry on the makeSEA 3D printed brushless motor on the reference wiki.

A viable, efficient 3D printed motor? Yes we can.

makeSEA 3D printable burshless motor  makeSEA motor rotor  makeSEA motor torque test

 

 

 

 

This was actually a dream of ours: to design a 3D-printable motor that can be printed on most basic 3D printer models and is powerful and efficient enough for common applications.

The design came from the amazing technical and exploratory mind of our Senior Maker, Christoph Laimer. And it was tricky. You can read all about the foibles of version 0 soon; incredibly valuable trials that led to the successful creation of version 1.

The four elegant components are printed with PTEG, PLA and magnetic PLA, and are paired with a steel shaft, a couple screws and bearings, magnets, and finally copper wire. The result is a relatively small motor (52mm diameter and 54mm length) that boasts 60% efficiency and enough power to run a small- to mid-size RC vehicle.

The makeSEA reference wiki has all the details on Christoph’s 3D printable brushless motor design, including a link to download a makeSEA rights managed version of the STL file.

— 10 Items per Page
Showing 31 - 32 of 32 results.

Check Out the makeSEA Mash Market® for a collection of useful designs related to this Wiki article.

Enabling AR, mixed reality and 3D content for everyday use.SM

 

for Architecture
& Design
Magic Leap &
AR/Mixed Reality
Content Publishing
for Education
& Making

 

for Construction
for Trade Shows
& Exhibits
for Retail
& Branding

What Green 3D Projects would you like to see at makeSEA?

What green 3D projects would you like to see at makeSEA?

What do you use for 3D Print Object Digital Rights Management today?

What do you use for 3D Print Object Digital Rights Management today?

using the 660w motor on a bike

Hello everybody, can we use the 660w printed motor or other printed motor on a bike...

RE: using the 660w motor on a bike

Hi Virgil, Thanks for posting.  The short answer is "Yes!", that is a perfect...

RE: using the 660w motor on a bike

Thanks for your answer, i just bought a creality cr10s. I will definitely start a project...

Engine 600 is effective

I'm not sure, so ask people, what is the evaluation of the 600 engine